Operation and Maintenance Manual and User Service Guide for Industrial Power WP10 Series Diesel Engine
12
2 Diesel engine installation and connection
2.1
Before installation of diesel engine, the installers should carefully read
the on-board documents to be familiar with the diesel engine structure
and installation requirements.
2.2
The installers should be mechanical technicians and electrical ones
with a certain installation experience.
If the diesel engine to be mounted is greatly different from the information
provided by the factory, please ask for professional.
2.3
WP10 series diesel engine unpacking and hoisting
During unpacking the diesel engine, do not damage the parts of diesel engine.
After unpacking, check whether the exposed port seals of oil/fuel/coolant
pipes are in intact. It is prohibited that the foreign material gets into the pipes.
Refer the packing list of diesel engine to check whether the on-board
documents and spare parts are all in readiness.
Use the ring screw to hoist the diesel engine, during which, the crankshaft
should be kept horizontally. It is recommended to use the following rings
(see fig. A).
Fig. A
图
A
