12. DISPOSAL
Î
Dispose of the WEH
®
Product appropriately when you no longer need it. Observe the
national and local disposal regulations valid at the time of disposal.
13. ACCESSORIES | SPARE PARTS
Adaptors
Various adaptors are available to connect the ‘B1’ media inlet of the WEH
®
Product to the
filling hose.
Actuation
Various actuation units such as bails, wire ropes etc. are available in different shapes
and sizes for the WEH
®
Product.
Locking devices
Additional locking devices are also available for the WEH
®
Product.
TD1 swivel joint
A swivel joint is available for the WEH
®
Product. The swivel joint enables radial
alignment of the connector when connecting to the cylinder valve thread. Thus
simplifying the connection procedure even further. Twisted hoses are prevented.
Quick release coupling TK350-TN350
Quick release coupling for quickly and easily exchanging the WEH
®
Product for repairs,
to switch to other standards and to switch from residual pressure to non-residual
pressure connectors.
Part No�
Description
Media inlet ‘B1’
Port ‘B2’
C1-91242
TK350-TN350
M16x1.5
male thread
M16x1.5
female thread
Spare parts
The following parts are available for maintenance of the WEH
®
Product:
Part No�
Position
Description
On request
Pos. 7
Front seal
Î
When ordering, please indicate the part no. marked on the WEH
®
Product.
Please note:
For the correct use of WEH
®
Spare parts, please refer to
chapter 9. Inspection | Maintenance on page 23.
MD-10058-L51-R1.1.0-03
Page 31
Operating instructions
AE
Summary of Contents for TW57
Page 2: ......
