Weh TSF2 H2, Operating Instructions Manual

Page: 16 / 54

7. INSTALLATION
7�1 Safety instructions for installation
Î
Check the information provided in these operating instructions and the label on the
WEH
®
Product. The information must conform to your application.
Î
Only connect the WEH
®
Product to faultless connections.
Î
Check the WEH
®
Product for transport damages, contamination and other damage. If
you should detect anything wrong with the WEH
®
Product, it may no longer be used.
Replace the WEH
®
Product or send it to WEH for maintenance.
Î
Remove transport securing devices (such as protection caps) before installing the
WEH
®
Product. Transport securing devices serve the purpose of protecting the
product and connection ports during transport and storage. The transport securing
devices are not, for example, designed to withstand pressure or to be used as plugs.
Î
Ensure that the system is depressurized. Installation must only be effected in de-
pressurized condition.
Î Install the WEH
®
Product carefully without exerting any force.
The product must not be exposed to any additional mechanical stress. Additional
mechanical stress, e.g. lateral forces caused by connected pipes, may lead to leak-
ages and may cause the product to burst.
Î Relevant technical standards must be observed during installation.
Î
Observe the installation direction of the WEH
®
Product. The coalescing filter is mount-
ed between two pipe or hose ends of the media line. The drain port ‘Q’ of the coalesc-
ing filter should point perpendicularly downwards and be easy to access. The plug
must be unscrewed to allow accumulated oil to be bled off.
Attention: Please note the flow direction marked.
Î
Before installation, check if the counterparts are designed to withstand the assembly
data (see Chapter 7.2 Installing the filter ) that WEH determined for this WEH
®
Product.
Note: The indicated assembly data (tightening torques, assembly turns etc.) are values
that apply only to the components delivered by WEH.
MD-10029-L51-R2.1.0-03
Page 16
Operating instructions AE