Wegener DTV742, User Manual

Page: 24 / 50

DTV 742 User’s Manual
800057-01 Rev. B 24 wegener.com
Figure 3.2 Stream Info Page
Unit
Configuration
Page The Unit Configuration page (Figure 3.3) is used to save and load configura-
tions. A configuration is the set of user-selectable items that make up the oper-
ating state of the unit. When all user-selectable items have been defined, these
setting may be stored as a named configuration. Up to ten configurations may
be stored for later use. The
Current Configuration at the top of the page gives
the name of the configuration in use. After changing parameters, you may
name the new configuration and store it in one of the ten configuration slots.
When a stored configuration is desired for use, select it from the
Load Config-
uration
drop-down menu and press the
Load
button. As soon as the load but-
ton is pressed, the selected configuration is loaded and those settings
immediately become the active output characteristics. This feature allows
quick changes of multiplex characteristics between predefined settings.