Wegener DTV742, User Manual

Page: 13 / 50

wegener.com 13 800057-01 Rev. B
Chapter 2 Installation
This chapter provides instructions on unpacking, mounting, and connecting
your DTV742 as well as connector information including detailed pinouts.
2.1 Unpacking and Inspection
Carefully unpack the unit and its ac power cord and inspect for obvious signs
of physical damage that might have occurred during shipment. Any damage
claims must be reported to the carrier immediately. Be sure to check the pack-
age contents carefully for important documents and materials.
NOTE: Please save the packing materials and original shipping containers in
case you must later return the unit for repair. Packing these units in other
containers in such a way that they are damaged will void your warranty.
2.2 Location and Mounting
The DTV742 should be located indoors and may be mounted in a standard,
19-inch equipment rack within one standard RU.
WARNING
This is a Class A product. In a domestic environment this product may cause
radio interference for which the user may need to take mitigating action.