C CONFIGURATIONS
Description:
It sets the index of the first programmable read word for data communication (inputs for master).
C8.1.1 Data Read
C8.1.1.2 Slot 1 Quantity
Range:
1 ... 50
Default:
1
Properties:
Stopped
Description:
It sets the number of read words for data communication (inputs for master), from the first word on.
C8.1.1 Data Read
C8.1.1.3 Slot 2 1st Word
Range:
1 ... 50
Default:
26
Properties:
Stopped
Description:
It sets the index of the first programmable read word for data communication (inputs for master).
C8.1.1 Data Read
C8.1.1.4 Slot 2 Quantity
Range:
1 ... 50
Default:
1
Properties:
Stopped
Description:
It set the number of read words for data communication (inputs for master), from the first word on.
C8.1.1 Data Read
C8.1.1.5 Word #1
C8.1.1.5 to C8.1.1.54
C8.1.1 Data Read
C8.1.1.54 Word #50
Range:
0 ... 65535
Default:
0
Properties:
Stopped
Description:
Select the net address of other parameter, which content will be available as reading data for fieldbus interfaces
(inputs: sent to master).
The data size of the referenced parameter must be considered. If data size is bigger than 16 bits, the next data read
word configuration must be set to the same net address.
C8.1.2 Data Write
Configure a set of 16 bit parameters to write over the network.
C8.1.2 Data Write
C8.1.2.1 Slot 1 1st Word
Range:
1 ... 20
Default:
1
Properties:
Stopped
Description:
It sets the index of the first programmable write word for data communication (outputs for master).
SSW900 | 16