WEG Drive Scan, Manual

Page: 61 / 74

7
MONITORING DASHBOARD
Figure 7.1: Parameters table
In the table, it is possible to check the parameters, their descriptions, values corresponding to a reference date and
to the current date (or date of the last reading). In the dashboard, the user is still able to assign, through the button
“Assign reference”, a reference date to compare the parameter values of the chosen date with the current values.
Through the “Request parameterization reading” button, it is possible to request the reading of the parameters,
inserting them as current values in the table. Such event can be repeated once every 10 minutes.
The result of comparing parameter values between the reference date and the current date is listed in the “Status”
column. The “Status”’ can be “No Change”, when there is no divergence between the values read on the two
dates, or it can be “Changed”, when there is divergence in the values read.
Low Voltage Devices | 7-2