WEG CFW300 V1.3X, Programming Manual

Page: 127 / 157

Reading Parameters
CFW300 | 15-1
15
15 READING PARAMETERS
It is important to point out that all the parameters of this group can only be viewed on the HMI display, and cannot
be changed by the user.
P001 - Speed Reference
Adjustable
Range:
0 to 9999 Factory
Setting:
Properties:
ro
Description:
This parameter presents, regardless the origin source, the speed reference value in the unit and scale defined
for the reference by P208, P209 and P210. The full scale and reference unit in the factory default are 60.0 Hz
for P204 = 5 and 50.0 Hz for P204 = 6.
P002 - Output Speed (Motor)
Adjustable
Range:
0 to 9999
Factory
Setting:
Properties: ro
Description:
Parameter P002 indicates the speed imposed to the inverter output at the same scale defined for P001. In this
parameter, the compensations made to the output frequency are not shown. In order to see them, use P005.
P003 - Motor Current
Adjustable
Range:
0.0 to 40.0 A Factory
Setting:
Properties: ro
Description:
It indicates the inverter output current in amperes RMS (Arms).
P004 - DC Link Voltage (Ud)
Adjustable
Range:
0 to 524 V Factory
Setting:
Properties:
ro
Description:
It indicates the DC link direct current voltage in (V).
P005 - Output Frequency (Motor)
Adjustable
Range:
0.0 to 400.0 Hz
Factory
Setting:
Properties: ro
Description:
Real frequency instantly applied to the motor in Hertz (Hz).