Faults and Alarms
14-6 | CFW300
14
14.15 FAULT HISTORY
The inverter is able to store a set of data on the last three faults occurred, such as: fault number, current (P003),
DC link voltage (P004), output frequency (P005), power module temperature (P030).
P048 - Present Alarm
P049 - Present Fault
Adjustable
Range:
0 to 999
Factory
Setting:
Properties:
ro
Description:
These parameters indicate the alarm (P048) or the fault (P049) number that may be present in the inverter.
P050 - Last Fault
P060 - Second Fault
P070 - Third Fault
Adjustable
Range:
0 to 999
Factory
Setting:
Properties:
ro
Description:
These parameters indicates the number of the occurred fault.
P080 – Last Fault in “Fire Mode”
P081 – Second Fault in “Fire Mode”
P082 – Third Fault in “Fire Mode”
Adjustable
Range:
0 to 9999
Factory
Setting:
Properties:
ro
Description:
These parameters indicate the last three faults that occurred on the inverter while the "Fire Mode" was active.
P051 - Output Current Last Fault
Adjustable
Range:
0.0 to 40.0 A
Factory
Setting:
Properties:
ro
Description:
It indicates the output current at the moment of the last occurred fault.
Summary of Contents for CFW300 V1.3X
