Brightness
Beam Angle
Battery
Burn Time
Depth Rated
LED Life
Material
Oxidation
Dimensions
Weight
5000 Lumens/5000K/CRI:Ra90
120 Degrees
4 x 18650 Lithium-ion batteries (3400 mAh)
Approx. 50 min (100% flood)
100m / 330ft
Over 50,000 hours
Aviation aluminum
Hard anodic oxidation
115 (D) x 127.8 (L) mm
555g on land (Including the battery) /
265g in water (Including the battery)
1
3
2
Features
Light Head
Wide Light
Red Light*8pcs
Specification
Standard Accessories
① Solar Flare 5000
④ YS A Ball mount
③ Lithium-ion battery
⑥ Anti-collision O rings x 3pcs
② Charger
⑤ Spare O-rings x 2pcs
To install the batter y
1. Turn the tail cap counter-clockwise to open；
2. Put the Lithium-ion battery into the battery compartment, the battery
compartment is located in the body (diagram below).
NOTE：Look at the the label located on the inside of the tail cap, Make
sure to align the positive and negative ends of the battery with the
positive and negative terminals on the tail.
3. Turn the tail cap clockwise to close the battery compartment
(i.e. reattach the tail to the light head).
To operate the light
Turn ON:
Press the right and left buttons at the same time and hold them down for
one second. Then immediately press and release the left button. When
the light is turned on it will be in the flood light mode at 100% brightness.
Turn OFF:
Press the left button and hold it down for two seconds.
USER MANUAL
5000 Lumens
Flood.
Waterproof to
100m/330ft
Wide lens
O-rings
(protect against bumps)
YS Adapter
Tail cap
ON/OFF Button
