Smart focus 1000
MANUAL
Please read the manual carefully before using the video light
Manual Content
<Instruction>
- Component
- Specifications
- Unpacking
<How to use>
- To install the battery
- Operating Instructions
- Thermal protection
- Battery Level Indicator
- To charge the battery
<Maintenance and Warranty>
- General Maintenance
- Warning
- Warranty
- Troubles Shooting
Component
Specifications
LED
Parameters
Brightness
(Lumen)
Beam Angle
(In water)
Battery
Run time
Depth Rating
LED Life
Material
Oxidation
Size
Weight
white Light: 1pcs LED CREE XP-L-HI 5500K
red light: 2pcs LED CREE XB-D 620nm
Wide Light 60 Degrees
1 x 18650 Li-ion batteries (3400 mAh)
Turbo light
：7
0min
100m / 330ft
Over 50000 hours
Aviation aluminum
Hard anodic oxidation
33 (D) x 141.2 (L) mm
200g land (Include the battery)
105g in water (Include the battery)
Li-ion battery
Charger
Video light
O Ring Decorative ring
Hand ORope
Unpacking
TO install the battery
1.Turn the tail cap counter-clockwise to open.
2.Loading the Li-ion battery into the tail cap, make sure the
polarity battery must match the polarity of the diving light
contacts.
3.Turn the tail cap clockwise to reattach the tail to the head
of the video light.
Operating Instructions
Turn on
：Press the Button and hold it down for 1 second,
When the light is turn on it will be in the white light mode
at 100% brightness.
Tail Cap
(LED Light)
Wide Light：1000 Lm
Tail Cap
Battery Level Indicator
Strobe port
Button
Light Head
light clamp
①
②
③
