EOTec 2104 User Manual
Introducing Switch Tools
mirroring for each source port. In the sample image above, port 5 is monitoring only the
messages sent from port 3.
Switch Configuration Window – OK Output Page
Use this page to configure the functionality for the OK Output Alarm. The
OK
LED is
normally
Green
when conditions are good.
Select the conditions that should trigger a fault.
Function
Description
Power 1 failure
DC inputs to the switch.
Power 2 failure
For the EOTec 2104, Power 1 and Power 2 are electrically
tied together, so either check signifies the same power
failure.
Ring failure anywhere
A break in the ring at any location is considered a fault
condition.
Ring failure adjacent to
this switch
Only a break between this Weed Ring Switch and an
adjacent Weed Ring Switch is considered a fault condition.
32