weed instrument EOTec 2104, User Manual, Page: 26 / 92

EOTec 2104 User Manual Introducing Switch Tools
Toolbar Button Description
Load Selected Switch
Configuration
Click this button to load a switch configuration into
the selected Weed Ring Switch. For more details,
refer to
Loading a Configuration into the Ring Switch ,
later in this chapter.
Explain Selected Yellow
Warning
Should there be any errors made during
configuration, the cell highlighted yellow indicates the
location of the error. Select that cell and then click
this button to find out how to resolve the problem.
Show Ring Switch Status Click this button to open the Switch Status window ,
which displays ring, port, DC power and OK output
status for the selected Weed Ring Switch.
Monitor Networks
Click this button to open the Network Monitor
window , which displays switch name, type, MAC
address, firmware version, and OK LED status of all
ring switches found on your network.
Menu Commands
File Menu
Command Description
New Starts a new project (no predefined switch configurations
and loading schemes).
Open…
Opens a saved EOTec 2104 Switch Tools project
(project file ending with .6sw).
Save Saves or resaves the current project.
Save As… Saves the current project under a different project file
name.
Output to File
Copies your project file details to a comma-separated
variable (.csv) file.
Auto-Open Last File When the EOTec 2104 Switch Tools utility starts, it
automatically loads the last project file that was opened
with this utility.
Exit
Closes the EOTec 2104 Switch Tools utility.
Note : For your convenience, the EOTec 2104 Switch Tools utility maintains a list of
the most recent project files that were opened. Click on any of the files listed at
the bottom of the
File menu to easily jump between projects.
19