Weco Edge 550, Manual

Page: 12 / 221

Edge 580 - Edge 550
1-11
=> Installation
1.1 UNPACKING THE MACHINE
1.1.1 W
ARNING
>
Ensure that the machine is placed in accordance with the TOP and BOTTOM signs on the box.
>
Place the machine on a flat, stable surface.
1.1.2 P
ROCEDURE
Follow the steps below to unpack the machine :
Flow chart 1-1 : Unpacking of the edger
#1 Place the machine on the floor in its packing with the help of another person.
#2 Cut the two straps on the main carton.
#3 Cut the adhesive tape on the main carton.
#4 Check that the accessories (small box, case and tube) have been supplied,
and keep them close to the machine.
#5 Pull the carton upwards and remove it.
#6 Cut the two straps on the second carton.
#7 Cut the adhesive tape on the second carton.
#8 Pull the second carton upwards and remove it.
#9 Remove the plastic protection from the machine.
#10 With the help of a second person, lift the machine by the rails and place it
on the work bench.
#11 Keep the packaging cartons. We advise you to stock them flat.