MultiPort/LT User Reference
Page 77
MultiPort/LT Gateway Code Commands
12 timedout, 23 cache flushes 0 discarded routes
3.3.3.14.
f - Filter Statistics
The filter statistics show the packets that have been processed, and the number
that have been modified or dropped.
A typical report:
Filter Stats...: 4 pkts processed;
0 modified NBP packets;
3.3.4.
Internal Table Printing Commands
3.3.4.1. 0,1,2,3,4,5,6,7 - Interface Information
This command prints out information associated with the selected
MultiPort/LT interface. 0, 1, 2 and 3 are the LocalTalk interfaces; 4 is the IPTalk
interface, 5 is the EtherTalk Phase 1 interface and 6 is the EtherTalk Phase 2
interface. Interface 7 is the ARA interface
Interface:
Name of interface
Type of network
Whether RTMP being received
RIP:
Whether RIP being received
IP:
IP Address and Mask and Broadcast
address. Also MTU, RIP cost and timer
A'talk:
Node and Network Number
IP address assignment:
Static and Dynamic IP address range
for this interface
Link level address:
Ethernet Number
ARP:
Protocol type
A typical report (when 0 is typed):
Interface: ab0:
Phase 2 Appletalk net.
Not receiving RTMP (no other active appletalk routers).
RIP: send routes, ignore received default
Not receiving RIP (no other active IP routers).
IP: address 192.9.210.1 subnet mask 255.255.255.240 (0xFFFFFFF0)
