MultiPort/LT User Reference
Page 66
Chapter 3
The current buffer usage is shown as:
free:
Free
ltalk:
Reserved waiting for incoming LocalTalk
ether:
Reserved waiting for incoming Ethernet
arp:
Address Resolution Protocol
data:
General Data
ip:
Internet Protocol
ddp:
AppleTalk DDP
rtmp:
Routing Table Management
zip:
Diagnostic Message
msg:
Message
time:
Timeout Queue
route:
Packets taken by RIP and Routing tables
decnt:
DECnet
flash:
Flash Eprom
arap:
ARA buffers
mnp:
Error Correction Protocol buffers
The ARAP Malloc counters are also shown.
A typical "B" report:
Memory configuration:
Two banks of 256 kilobyte SIMs installed
Wanda is using 1021 out of 1024 Kbytes of Parity-checked memory
Configuration FLASH chip is Intel 28F256P2 256Kbit, 7 uses.
Wanda FLASH chip 0 is Intel 28F010 1Mbit, 2 uses.
Wanda FLASH chip 1 is AMD 28F020 2Mbit
Wanda FLASH chip 2 is AMD 28F020 2Mbit
Buffer usages: refusals: 1
free : 153 ltalk: 2 ether: 32 rtmp : 1
zip : 2 msg : 1 time : 1 route: 2
decnt: 1 mnp : 2
ARAP Malloc Counters:
Free list contains 4 entries, 14520 bytes, min 32, max 13248.
Memory requested from system = 262144 bytes
Malloc calls = 732, bytes = 261352, refusals = 0
Free calls = 621, bytes = 154848
Malloc - Free calls = 111, bytes = 247608
3.3.3.2. a, b, c, d - Select Channel to Examine
Commands "a" to "d" select Interfaces 0 to 3 respectively.
