MultiPort/LT User Reference
Page 53
Inside MultiPort/LT and Monitor Commands
2.2.5.2.10.
Configure Display Command
There are four types of memory associated with configuration data. Refer to
Section 2.2.1. This command displays the contents of the Flash EPROM,
"master" and "working" configuration areas. To display the options available:
Conf> display
Config (EE) image viewer
EEDisp> ?
Available config images:
Flash
Master
Working
Quit
To display the current contents of a selected memory:
Conf> display flash
Configuration version 3 (current 3), mods 5
Configuration History:
Date: Wed Jun 16 09:59:10 1993; Wed, Jun 16, 1993
From: A_Hostname:(A_Working_Directory)CDC Wren III:MultiPort Ma
Name: "Main_Router"; Address: 000018-000080
DECnet enabled - Megan will use Ethernet Address: aa:00:04:00:0A:04
MPG Password: "(none)"
Boot File: "LT_Code"; Boot Path: "Boot" (default)
Boot User: "anonymous" (default); Boot Password: "etherboot" (default)
Boot Zone: "*" (default)
Options: TCPBOOT APPLETALKBOOT NS116 RARP BOOTP
TRUSTWORTHY RAMEEPROM ERRDIAGS FLASHBOOT
Flags: 0x0
RAM base 0x100000 (size 512Kb)
IP addr: 131.161.200.10 broad: 131.161.200.255 mask: 255.255.255.0
boot: 131.161.200.2 conf: 131.161.200.1 debug: 131.161.200.0
name: 131.161.200.1 gate: 131.161.200.1
Daughter board type: 0x0001 Appletalk.
at0: net 10.0 (2560), node 210, Zone "WCP" (3)
Interface Enabled and Seed, Phase 2, RIP Enabled
IP addr 131.161.210.1, mask 255.255.255.240 (FFFFFFF0); Stat: 1, Dyn: 12
at1: net 10.1 (2561), node 210, Zone "WCS" (3)
Interface Enabled and Seed, Phase 2, RIP Enabled
