WebGate HS1620F-D, User Manual, Page: 64 / 99

63
Record time after event
User can select between 1~30mins and time after event will be recorded as much as time set by user
Program
Using [Program], adjust frame rate and quality configure recording
program for Continuous, Manual, and Schedule recording.
Select Program to configure frame rate & resolution. For maximum
performance, user can freely allocate the recording resource per
channel. This feature enables the user to lower the recording
performance of each channels and allocate the remaining resources
to raise the recording performance of a specific channel or
channels.
Program
There are 9 programs from A to I composing recording quality and
resolution per channel
.
Channels
Display the channel No
.
video
displays entered video resolution and FRP
.
Normal Record
Select frame rate per second and quality that are applied for normal video without events.
Event Record
Select frame rate per second and quality that are applied when event occurs. When event occurs DVR starts to record
by the frame rate per second and quality of Event Record.
FPS
FPS (frames per second) users can select 1 to 30fps per second. Max. Frame can be changed according to the
configuration.
Quality
This configures the recording quality. Value of Q can be configured between 1-10. The higher the number, the better
recording quality is.
Record capacity in use and minimum storable time consumption
It indicates record capacity status of DVR along with amount of connected HDD.
It also indicates storable time of all channels, only channels in use and expected storable time based on amount of
storage duing last 24 hours.
Quick Setting
Apply the same setting for all channels at once.
<Notice>
Frame rate per second and quality cannot be set exceeding the specification of DVR. Please check the specification of DVR first before
setting record.
menu

recording

program