WebGate HS1620F-D, User Manual, Page: 48 / 99

47
Port
Register port # in DVR and use it to connect to control center or webviewer.
Default port is 80 and be careful in entering the port # when used with PPPoE modem and router. To use port
forwarding & UPnP port forwarding, network port change (e.g. 8000) might be necessary. Please ask this
information to network administrator.
Bandwidth limitation.
Bandwidth is to configure the maximum transmission speed. Its default value is unlimited and users don’t have
to set bandwidth value if there is no need to limit the network data size of DVR
.
<warning>
Please consult DVR manager if you want to modify bandwidth value.
RTSP
It is short for Real Time streaming Protocol) and streams real time live
image of DVR
Authentification On: Only authorized users can view RTSP video.
Authentification Off: Non-authorized users can view RTSP video.
Stream1 : Original resolution
Stream2 : Lower resolution
In order to view channel 1 of DVR (Ex: 192.168.1.10) input
“rtsp://192.168.1.10/ch1/stream1”.
<Notice>
Use VLC player to view RTSP video on PC
IP filtering
Maximum 10 ranges of IP addresses can be set to allow or deny
remote network connection
Allow
Allow 192.168.0.0 ~ 192.168.0.255 > another IP addres that does not in
the range will not be allowed for remote network connection
Deny
Deny 192.168.0.0 ~ 192.168.0.255 > another IP address that does not
in the range will be allowed for remote network connection.
<Notice>
IP filtering limits remote connections to DVR Please be aware of what you are
doing before you change this page
P2P *
Input UID of P2P connection information in Webeye (Android or i-
phone) or scan QR code. Remote network connection can be made
easily without further configuration.