Operation
72800115 Markoprint X4JET
Seite 96 von 177
GB
Head adjustment
A mechanical imprecision between the print head modules / cartridges by multi-head systems
can be compensated in this menu.
It is m-1
– 2mm, which must be compensated.
A value from -50 to +50 can be entered to adjust the respective print head rightward or
leftward.
The respective print head goes rightward with a + value and leftward with a - value.
Conditions:
The print head must be installed horizontally. There may not be an overlap or gap between the
cartridges. It’s the best to check this with a layout, which goes over all print heads.
The print speed must set up optimal. The nozzles A+B must be correct in one row by prints
with two nozzle rows. This can be checked with a loupe
. There may not be a “shadow print”.
Divider and intensity must be set up optimal by printing. The nozzles A+B must be correct in
one row by prints with two nozzle rows. This can be checked with a loupe. There may not be a
“shadow print”.
Procedure:
1.
Set all values for the head adjustment to „0“.
2. I.e. by a quad head
all values for head 1 will set to „0“. Than a test print will made, which
goes over all print heads.
3. If there is a horizontally stowing between the first and the second print head module, it can
be compensated with the head adjustment of print head 2.
4. Proceed the same way with print head 3 and 4.
5. If there is a stowing after changing the cartridge, correct only the stowing of this cartridge.
1.
Touch the iLOGIK once in one of the status menus.
The
Label
submenu is displayed.
2.
Call the
Parameter
submenu by rotating the iLOGIK and select by pressing.
The
Print Delay
submenu is displayed.
3.
Call the
Head adjustment
submenu by rotating the iLOGIK and select by pressing.
The
Head adjustment
submenu is displayed.
4.
Make the desired setting by rotating the iLOGIK and select by pressing.
Summary of Contents for Markoprint X4JET
