Webdyn WebdynSunPM User Manual Download Page 95

Page: 95 / 168

USER MANUAL

–

WebdynSunPM

Version 2.05

préliminaire

corresponding  IP  addresses.  Enter  the
DNS server addresses you received from
your internet service provider (ISP) here.
You  can  also  enter  your  router  IP
address.  You  can  also  use  the  google

DNS: “8.8.8.8”

DNS 2

dns2

DNS 2 server. If the DNS1 server fails.

If your local network is managed by a network administrator, contact them before
including the WebdynSunPM gateway in your network.

3.2.2.4

Modem

The “Modem” part is used to configure the modem and get network information. To use the

modem, the SIM card must first be inserted into the product (

see section 2.4.2.2:

“

SIM card

”).

Summary of Contents for WebdynSunPM









































































































































































Search results

Summary of Contents for WebdynSunPM

Reviews:

Related manuals for WebdynSunPM

Brands by name

Popular brands

Webdyn WebdynSunPM, User Manual

Search results

Summary of Contents for WebdynSunPM

Reviews:

Related manuals for WebdynSunPM

Brands by name

Popular brands