webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
20
2.5.3 Other: Periodic Autoreset
From this section you can configure a scheduled autoreset.
• Autoreset not enabled
: activate the option if you do not want the device to reset automatically
• Autoreset every X hours
: activate the option if you want the device to autoreset every certain
number of hours. Usually set to 24h in metering applications
•
Auto-reset at specific time
: select this option if you want the device to self-reset at a specific
time of day
• Auto-reset if router can’t obtain IP after X minutes
: allows specifying the minutes after which
the device must autoset in case of not being able to obtain an IP address
ADDITIONAL NOTES
•
Once the configuration is finished, press the “SAVE CONFIG” button to save the changes.
Remember that you must restart the device for the new changes to take effect
