Suzuki Splash
1314128B_EN
5
Preliminary Work
WARNING!
- Open fuel tank cap, ventilate tank.
- Close the fuel tank cap again.
- Disconnect the battery "earth" or "ground" connection.
- Depressurise
the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Completely remove the battery.
- Remove the air intake resonator.
- Detach the wheel well trim on the right and left.
- Remove the bumper.
- Remove the fuel tank and the fuel-tank vent line according to the manufacturer's instructions.
- Remove the fuel-tank sending unit in accordance with manufacturer's instructions.
- Remove the lower cover of the instrument trim on the driver's side.
- Remove the upper A-pillar trim on the driver's side (only with Telestart).
- Remove the handbrake lever trim (only with digital timer).
Remove page 26 "Operating Instructions for End Customer" and add to the vehicle operating instruc-
tions.
Heater installation location
Photo shows vehicle with manual transmis-
sion!
1
Heater
Installa-
tion loca-
tion
1
1
