12 | Decommissioning the product
18 / 23
5111232A OI-II Webasto Next
11.5
Scan & Charge locking function
You can lock free use of your Webasto Next using the "Scan &
Charge" function in the Webasto ChargeConnect app.
You then have the option of enabling individual charging pro-
cesses via the two Scan & Charge QR codes supplied, which are
located under the protective film on your charging station when
it is delivered.
Instructions for charging in the locked state:
1.
Plug the Webasto Next charging cable into your car. In the
locked state, a charging process will not yet take place. The
charging station shows a green chase light (N6).
2.
Scan one of the supplied Scan & Charge QR codes using
the corresponding function in the Webasto ChargeConnect
app. The charging process will be enabled and will start.
The charging station shows a pulsing blue light (N4).
3.
After unplugging the charging cable at the end of the char-
ging process, free use is locked once more. For a further
charging process, repeat the steps.
NOTE
Green chase light running up and down
A green chase light on your charging station, which
runs up and down, signals locked status.
NOTE
Printing out additional Scan & Charge QR codes
If you need additional Scan & Charge QR codes, you
can print these out as described in chapter 3.1, "Print-
ing additional "Scan & Charge" QR codes" on page 6.
NOTE
Storing QR codes
You can keep your QR codes in your wallet or in the en-
trance area of your home to enable charging processes
in the locked state.
For more details see the Webasto ChargeConnect app.
12
Decommissioning the product
A decomissioning shall be carried out only by an electrician.
u
Disconnect the power supply.
u
Electrically disconnect the charging station.
u
Disposal: see chapter 15, "Disposal" on page 19.
13
Maintenance, cleaning, repair
13.1
Maintenance
Maintenance must carried out by an electrician only, and in ac-
cordance with local requirements.
13.2
Cleaning
DANGER
High voltages.
Danger of fatal electric shock. Do not clean the char-
ging station with a high-pressure cleaner or similar
device.
u
Clean the installation only with a dry cloth. Do not use ag-
gressive cleaning agents, wax or solvents.
13.3
Repair
Unauthorised repair of the charging station is not permitted.
Webasto reserves the exclusive right to perform repairs to the
charging station. It is only permitted for repairs to be carried out
by an electrician using original spare parts sold by Webasto.
14
To replace the charging cable
DANGER
Danger of fatal electric shock.
u
Switch off and secure the power supply to the char-
ging station.
NOTE
Only use genuine Webasto parts.
NOTE
The charging cable may be replaced a
maximum of
four times
during the service lifetime of the Webasto
Next.
NOTE
Refer to the Webasto online shop for part numbers:
Follow the installation instructions provided with the re-
pair kit when replacing the charging cable.
