Webasto Frigo Top 10, Workshop Manual

Page: 8 / 18

Frigo Top 10 - 43 | Pordoi 2000 - 4000 8
5.4 Change the service interval
Fig. 16: Interval setting at 2.000 hr
3
Make sure that the screen shows “ SEr ”
The standard service interval is 2.000 hr.
X
Press “ Set ”
–
The screen shows the actual service interval
/
X
Press “ Up ” or “ Down ” to increase or decrease the
service interval value:
0 = Service indicator is disabled
100 = 1.000 hr;
150 = 1.500 hr;
200 = 2.000 hr; 250 = 2.500 hr;
300 = 3.000 hr.
X Press “ Set ” to confirm a service interval.
–
“ SEr ” starts blinking.
– Screen shows “ SEr ”.
–
After approx. 10 s the display turns back to the
operating menu.
6 The programming tool or “hot key”
You can program the control element quickly or restore parameter with help of a programming tool, called the “hot key. The hot key
has 2 functions:
■
Download parameters from the hot key into the control element.
■
Upload parameters from the control element into the hot key.
Uploading parameters from the control element into the hot key provides a back up for eventual restoring parameter settings or to pro-
gram other control elements with the same set of parameters quickly.
6.1 General
Fig. 17: Slot hot key
3
Provide access to the backside of the control element or remove
the control element from its mounting panel.
X
You insert a hot key in the slot at the back of the control element.
Mind the right position of the hot key!
Fig. 18: Upload / download error in-
dication
The control element shows “ Err ” in case the download
or upload failed.
■
Switch the control element off and on again to
restart the download or upload.
or
■
Remove the hot key to stop operation.
6.2 Download parameters to the control element
X Switch off the control element.
X
Insert a hot key in the slot at the back of the control
element.
SET
SET