Webasto Frigo Top 10, Workshop Manual

Page: 7 / 18

Frigo Top 10 - 43 | Pordoi 2000 - 4000 7
5 Set and reset the service interval
5.1 Enter the service interval menu
Fig. 10: 1 st level Fig. 11: Service menu
The instructions below describe how to change the settings via the
control element.
+
X
Press “ Set ” + “ Down ” and hold for 3 seconds.
–
The menu shows “ LS ” (1
st
service level).
–
The degree symbol starts blinking.
+ X Press “ Up ” + “ Down ” and hold for 7 seconds.
– The menu shows “ SEr ” (Service menu).
5.2 Switch between reset interval and change interval
Fig. 12: SEr: Change interval Fig. 13: rSt: Reset interval
/ X Press “ Up ” or “ Down ” to switch between:
–
“ SEr ” change interval
–
“ rSt ” reset interval
5.3 Reset the service interval
Fig. 14: Reset interval, No Fig. 15: Reset interval, Yes
3
Make sure that the screen shows “ rSt ”
ATTENTION
Do not reset the service interval without servicing
the refrigeration system.
Result: System failure could occur due to insufficient
maintenance.
X Reset of the service interval is only allowed after ser-
vice has been carried out.
More information about service is available in “Service
handbook and system data” supplied with the system.
X
Press “ Set ”.
–
The screen shows “ n ”.
X
Press “ Up ” to switch to “ y ”.
X Press “ Set ” to reset the service interval.
–
“ rSt ” starts blinking.
–
The clock symbol disappears.
–
Screen shows “ SEr ”.
–
After approx. 10 s the display turns back to the
operating menu.
SET
SET
SET