Figure 34: Replacing evaporator mount, glow plug,
exhaust temperature sensor, combustion pipe and
heat exchanger
1. Torx screw (4 pc.)
2. Spring clip
3. Evaporator mount (diesel)
4. Combustion pipe
5. Round sealing ring
6. Heat exchanger
7. Evaporator mount (petrol)
8. Glow plug
9. Retaining clip
10. Exhaust temperature sensor
10.0 Packaging, storage and shipping
10.1 General information
The heater or its components which are sent to Webasto for testing or repair must be cleaned and packaged so that they
are protected against damage when handled, transported and stored. An ambient temperature of +85 °C or –40 °C must
not be exceeded for storage.
Shipment address:
The address of the responsible Webasto service center can be found on www.techwebasto.com.
62
Air Top Evo 40 / Air Top Evo 55 Service Manual
Summary of Contents for Air Top Evo 40
Page 63: ...4 2015...
