background image

Operating  instructions

Air Top

00 ST

35

Air Top 5000 ST

Servicing

 

and

 

safety

 

instructions

11.

The

 

fuel

 

specified

 

by

 

the

 

vehicle

 

manufacturer

 

is

 

suitable

 

for

 use 

in

Air

 

Top

 

3500

 

ST

 

B

 

/

 

Air

 

Top

 

5000

 

ST

 

B.

 

Both

 

leaded

 

and

 

unleaded

 

fuel

 

may

 

be

 

used.

 

The

 

diesel

 

fuel

 

specified

 

by

 

the

 

vehicle

 

manufacturer

 

must

 

be

 

used

 

for

 

the

 

Air

 

Top

 

3500

 

ST

 

D

 

/

Air

 

Top

 

5000

 

ST

 

D

 

heater

 

(diesel).

 

The

 

Air

 

Top

 

3500

 

ST

 

D

 

/

 

Air

 

Top

 

5000

 

ST

 

D

 

heater

 

is

 

also

 

licensed

 

for

 

use

 

with

 

PME

(bio-diesel),

 

which

 

complies

 

with

 

DIN

 

EN

 

14214.

We

 

know

 

of

 

no

 

negative

 

influences

 

due

 

to

 

additives.

If

 

fuel

 

is

 

extracted

 

from

 

the

 

vehicle's

 

tank,

 

follow

 

the

 

additive

 

instructions

 

issued

 

by

 

the

 

vehicle

 

manufacturer.

If

 

you

 

change

 

to

 

low-temperature

 

fuel,

 

the

 

heater

 

must

 

be

 

operated

 

for

 

approx.

15

 

minutes

 

so

 

that

 

the

 

fuel

 

system

 

is

 

filled

 

with

 

the

 

new

 

fuel.

12.

The

 

temperature

 

in

 

the

 

area

 

around

 

the

 

heater

 

must

 

not

 

exceed

 

85

 

°C

 

(storage

 

temperature).

 

If

 

the

 

temperature

 

exceeds

 

this

 

level

 

there

 

is

 

a

 

risk

 

of

 

permanent

 

damage

 

to

the

 

electronics

 

systems.

13.

Failure

 

to

 

follow

 

the

 

installation

 

instructions

 

and

 

the

 

notes

 

contained

 

therein

 

will

 

lead

 

to

 

all

 

liability

 

being

 

refused

 

by

 

Webasto.

 

The

 

same

 

applies

 

if

 

repairs

 

are

 

carried

 

out

 

incorrectly

 

or

 

with

 

the

 

use

 

of

 

parts

 

other

 

than

 

genuine

 

spare

 

parts.

 

This

 

will

 

result

 

in

 

the

 

invalidation

 

of

 

the

 

type

 

approval

 

for

 

the

 

heater

 

and

 

therefore

 

of

 

its

 

homologation

 

/

 

EC

 

type

licen

s

e.

14.

Keep

 

the

 

hot

 

air

 

inlet

 

and

 

hot

 

air

 

outlet

 

free

 

of

 

dirt

 

and

 

foreign

 

bodies.

Contaminated

 

or

 

blocked

 

hot

 

air

 

lines

 

may

 

cause

 

overheating

 

and

 

thus

 

result

 

in

 

the

overheating

 

cut-out

 

tripping.

15.

To

 

prevent

 

mechanical

 

parts

 

seizing,

 

the

 

heater

 

should

 

be

 

operated

 

for

 

approx.

10

 

minutes

 

every

 

four

 

weeks.

16.

Do

 

not

 

stand

 

on

 

the

 

heater

 

and

 

do

 

not

 

place

 

any

 

heavy

 

items

 

on

 

the

 

heater

 

or

 

throw

items

 

at

 

the

 

heater.

17.

Do

 

not

 

place

 

any

 

items

 

of

 

clothing,

 

textiles

 

or

 

similar

 

materials

 

over

 

the

 

heater

 

or

 

in

front

 

of

 

the

 

hot

 

air

 

inlet

 

and

 

the

 

hot

 

air

 

outlet.

18.

The

 

current

 

of

 

hot

 

air

 

in

 

the

 

heater

 

must

 

not

 

be

 

restricted

 

or

 

blocked

 

by

 

highly

inflammable

 

substances

 

or

 

materials

 

such

 

as

 

rags,

 

cleaning

 

wool,

 

etc.

19.

The

 

heater

 

must

 

not

 

be

 

cleaned

 

with

 

a

 

high

 

pressure

 

cleaner.

Ident-Nr

.

90

103

14A

5/0404

Webasto

 

Thermo & Comfort N.A., Inc.

15083 North Road

Fenton, MI 48430

Servicing

 

and

 

safety

 

instructions

1.

When heater is in use, the surface of the hot air outlet may become hot to the touch. 

Contact with skin may cause burns.

2.

Webasto heaters must be switched “off” when re-fueling at filling stations and/

or while loading or unloading flammable materials for transport, to prevent the 

risk of explosion.  Please review owner’s manual for safety and use instructions.

3. The year in which the heater was used for the first time must be permanently

displayed on the factory plate by deleting the inapplicable years from the plate.

4.

The heaters are not designed for heating hazardous substance transport 

compartments.

5. Claims can only be made if it can be verified that the claimant has complied with the

servicing and safety instructions. 

6.

The heater may not be operated in enclosed spaces (such as garages) as a 

result of the risk of poisoning and asphyxiation, even if a timer or Telestart remote 

is used.

7. The heater must be checked by an expert at the latest at the start of the cold weather

period.

8. In the even of long-lasting heavy smoke development, unusual combustion noises or

a smell f fuel or if the heater suffers continuous fault cut-outs with error messages 

(flashing code), it must be shut down by removing the fuse and must not be reused until 

it has been inspected by Webasto trained personnel.

9. Wherever inflammable vapors or dust may form (for example in the vicinity of fuel,

carbon, wood dust or cereal stores or the like), the heater must be switched off as a 

result of the risk of explosion.

10. The heat transfer unit on air heaters is exposed to very high thermal stress and 

must be replaced by a genuine Webasto spare part ten years after it is used for the first 

time.

If exhaust lines pass through areas used by personnel, they must also be replaced by 

genuine spare parts after ten years.

Reviews: