background image

STEP 3: 

RE-INSTALL DRIVE ASSEMBLY

•  Place new assembly in body.
•  Install new snap ring.
•  Reinstall nozzle/cap assembly.  

(twist on clockwise).

NOTE:  Cap is self-tightening,  

no need to overtighten.

STEP 2: 

INSTALL NEW NOZZLE

•  Twist off nozzle/cap (counterclockwise).
•  Pull off nozzle assembly.
•  Snap in correct nozzle.  

(see Performance Chart).

FOR WINDY CONDITIONS

•  Turn short range nozzle to 

vertical position to improve 

distribution patterns.

D70 SERIES

Full Circle Golf Rotor

NOZZLE INSTALLATION GUIDE

STEP 1: 

REMOVE DRIVE ASSEMBLY

Help Desk: 

888-484-3776

support.weathermatic.com

99903377_revA

NORMAL WINDY

Reviews: