Quick Instruction
Anschließen leicht gemacht
14 of 28
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.:+49 911 376638-30
www.easyais.de
1.10.
What to do if not working properly?
Pos Problem
Reason
Solution
1 "ON" LED not
lit
Board power
Please check the board
power connection
2 Not either
Channel A or
Channel B LED
flickering
No signals around
Are you in an area
with enough AIS
traffic?
3
Antenna connection
bad
Check your connectors
and your antenna
cable. Please be very
carefully with the
soldering of sockets
and plugs. Bad work
will cause a loss of
sensitivity.
4 No AIS Targets
on the screen
Not well connected to
the PC or the
chartplotter
This can be checked
with a PC and the
"Hyperterminal
software" of
Windows. You find
the Hyperterminal SW
under
/Programms/Accesories
/Communication/.
Connect the easyAIS
by means of the cable
and the SUB D9 plug,
which is also enclosed
to the serial port of
the PC. Please
