BeHear PROXY User Manual
Page 11 of 43
Product Name: BeHear PROXY
Product No.: ABH-130
Doc. No. BHPUM202012.31
Getting Started
Pairing with Bluetooth Devices
Before you can start using your BeHear PROXY neck speaker with a Bluetooth device (such as a
smartphone), you need to pair it with the Bluetooth device. Pairing can be done in either of two
ways:
•
Using the
W&H BeHear
app (which can be downloaded for free from the Google Play Store
or the Apple App Store, see “
” later in this manual). After launching
the app and placing the neck speaker into pairing mode (
), the pairing
process will proceed. Follow to the application’s prompts (see “
” below).
•
Using your smartphone’s Bluetooth setup process.
(This is
mandatory for iOS devices
– see
the “
” section for detailed instructions.)
Make sure the
Bluetooth function is turned on in the Bluetooth device. The neck speaker will appear in the
list of available devices as BeHear PROXY.
How to Place the BeHear PROXY Neck Speaker into Pairing Mode
1.
Make sure the BeHear PROXY neck speaker is powered OFF.
2.
Then, shift and hold the power button on the collar for
up to 5 seconds
, until the LED
alternates red/blue.
3.
When the pairing is complete the BeHear PROXY neck speaker will be connected to the
Bluetooth device automatically, as indicated by the blue LED which blinks periodically every
5 seconds.
Pairing BeHear PROXY with Additional Bluetooth Devices
After pairing BeHear PROXY with the first Bluetooth device repeat the same steps to pair it with
additional Bluetooth devices. Your BeHear PROXY neck speaker can be paired with up to eight
Bluetooth devices in total. If the list of paired devices is full you can clean it up by resetting the
neck speaker as described in the
Connecting with Bluetooth Devices
Automatic Connection of Paired Bluetooth Devices
BeHear PROXY remembers and can connect automatically with the last two connected devices.
Note
: When you pair and connect BeHear PROXY with a third device, the first paired device
becomes disconnected.
Choosing from Multiple BeHear PROXY Devices Paired to the Same Smartphone
If you have more than one BeHear PROXY neck speaker paired with the same phone you can
choose the desired neck speaker by its serial number. The serial number of the BeHear PROXY
neck speaker is listed underneath the product name in the W&H BeHear app
Connection
screen.
It is also printed on the underside of the BeHear PROXY neck speaker.
Connecting Simultaneously to Two Different Bluetooth Devices
Your BeHear PROXY neck speaker supports multipoint connection mode, managing two
Bluetooth connections simultaneously. For example, if you connect your neck speaker with two
phones or with a phone and the
HearLink™ PLUS TV transmitter
(a Wear & Hear companion
product, sold separately), you can receive calls or listen to audio from either device without
having to disconnect and reconnect.