Brine Nebulization System, Type Soldos V3
Index: 03
Change date: 01/03/2017
Operating instructions no.: BA DW 005-03 Soldos V3 EN.docx
Page 55 of 70
7
Maintenance, service, faults
7.1
Device maintenance
It is recommended to task a specialist company with maintenance.
The following points must be considered to ensure problem-free and germ-free
operation of the Soldos:
1.
Disinfection and maintenance according to the maintenance protocol in
Section 9.5
CAUTION !
Disinfection must be performed whenever the polyethylene
container is changed but at least every 28 days!
2.
Regular cleaning of the device. Brine water leaves ugly stains and corrodes
metals when it is not wiped off.
3.
Stocking of necessary consumables
7.2
Regular water inspection
Not required
7.3
Fault removal / fault codes
HINT !
It is furthermore possible that the switches or sensors are faulty and
that it is therefore not possible to transmit an electrical signal.
Dosing is interrupted in response to a device fault.
Fault indications
See the following fault table for removing the fault messages
Summary of Contents for Soldos V3
Page 72: ......
