Omio CNC Router Enclosure (Base) -
User Guide
(Rev 1)
Page 16
wcproducts.com
Step 11
Install the magnet into the Door Magnet Holder using the two #6-32 flat head bolts
prior to installing the Door Magnet Holder to the door. Repeat for all four magnets and
Holders.
Use two #10-32 x 1/2”L BHCS and nuts to attach the Door Magnet Holder to the Plastic
Door. Repeat for all four Door Magnet Holders.
Note: Be sure to check the polarity of the magnets before installing them� This magnet
and the one installed in Step 3 need to attract each other. Check that the door is held
up and that there is no gap between the magnets. If there is, then one magnet may
need to be flipped.
