16
Icon
Explanation
Icon
Explanation
Edit basic parameters of the
camera
Add the detected IP camera.
The camera is connected; you
can click the icon to get the
live view of the camera.
The camera is disconnected;
you can click the icon to get
the exception information of
camera.
Advanced settings of the
camera.
3.
(For the encoders with multiple channels only) check the
checkbox
of Channel No. in the pop-up window, as shown in
the following figure, and click
OK
to finish adding.
Record
Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You may refer to the user
manual for detailed information.
Note:
After rebooting all the manual records enabled are canceled.
Steps:
1.
Click
Remote Configuration> Camera Settings> Record Schedule
to enter Record Schedule settings interface.
2.
Select the camera to configure the record schedule.
3.
Check the checkbox of
Enable Schedule
to enable recording schedule.
Summary of Contents for WBXRN040P4E
Page 1: ...T E C H NO LO G I E S BOX WBXRN040P4E WBXRN080P8E WBXRN160P8E www wboxtech eu ...
Page 94: ...94 ...
Page 137: ...137 ...
Page 283: ...www wboxtech eu ...
