wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
1
Drafting Table
Assembly Instructions
w/ Drawers on Right
Step 1:
• Lay apron assembly on a protected flat surface with
apron side facing up.
Step 2:
• Insert hanger bolt on one leg through the corner
bracket and insert lock washer and hex nut.
• Screw on nut using a 1/2” wrench or 1/2” socket and
torque wrench.
• Do NOT tighten all the way.
• Repeat for the other leg.
• The leg with the chamfer must go on the front of the
table with chamfered edge facing out.
Step 3:
• Screw leg levelers into t-nut on bottom of legs.
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key) Any parts damaged during shipment must be reported
within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Tools Required
• 1/2” wrench
• 1/2” socket and
torque wrench
(optional)
• 4mm wrench
V031821 Version subject to change
Apron side
facing up
Step:
1
Front leg
Back leg
Front apron
Leg with a
chamfer needs to
be facing out
Hinge
Step:
2
Levelers
Step:
3
