- 7 -
What’s in the Box
WayteQ xTAB-70 Personal Touch Tablet
AC Power Adapter (5V/2A)
USB Cable, OTG adapter
Carrying case, Cleaning cloth
Quick Start Guide
Charging the Battery
Plug the AC power adapter into the Personal Touch Tablet and into a wall outlet.
Icon
will be turn flashing with charging sign while the battery is charging.
When charging is completed, the battery icon will turn into a steady green.
* It is strongly recommended you fully charge the device for about 4-6 hours before use.
Power on/off and Unlock Personal Touch Tablet
The Personal Touch Tablet is easy to set up. Just follow these steps:
1. To power on the device, press and hold Power button for 3 seconds to turn on tablet.
2. Wait un
til a screen with a lock and speaker icon show up, gently tap the “Lock” icon
and slide it toward the speaker icon to unlock tablet.
3. To power off the device, press and hold the Power button for 2 seconds until a MID
options message show up on screen where you can choose Power off option to power
off the device.
Note:
The screen with the lock icon will time out in 10 seconds if you do not unlock it. In
case it happens, the Power button
can be pressed briefly to make it show up again.
