600002W-001 C 10/18
Maintenance Free Battery
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Installation Manual WSB1275
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
SUMP PUMP DESCRIPTION
The WSB1275 is a maintenance-free, seal lead acid, rechargeable
battery. The construction and sealing technique prevents electrolyte
leakage from the termianls or case under normal usage.
Sealed lead-acid batteries are rechargeable batteries that
recombine suppresses gases, thus eliminating the need to add
water. Since they are sealed, the batteries will not leak and can
be installed in certain applications where “wet” battery can not be
installed.
UNPACKING
Inspect this unit before it is used. Occasionally, products
are damaged during shipment. If the pump or components
are damaged, return the unit to the place of purchase for
replacement, or call Customer Support (800-237-0987).
SAFETY GUIDELINES
This manual contains information that is very important to know
and understand. This information is provided for SAFETY and
to PREVENT EQUIPMENT PROBLEMS. To help recognize
this information, observe all safety information labeled danger,
warning, caution and notice.
This product can expose you to chemicals , including
DEHP, which is known to the State of California to cause cancer, birth defects
and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Do no load lead-acid batteries (hereinafter described
as “the battery”) in airtight equipment. Use of the battery in airtight equipment
may cause explosion of the equipment or injury.
Charge the battery using a specified
charger or under the chargin condition specified in this manual.
Charging the battery under any other conditions may cause the
battery to overheat, emit hydrogen gas, ignite, or burst.
Avoid direct contact of the battery with metallic
containers; acid-and-heat-resistant insulators should be employed. Leakage of
the battery in the absence of insulators may cause problems such as release of
fumes and ignition.
Do not place the battery near a device that
may cause sparks (such as a switch or a fuse). The battery may
generate flammable gas when charged, so remember to keep the
battery away from fire or an open flame to prevent any sparks
from igniting or causing explosions.
690003-001 B 11/19
© 2019, WAYNE/Scott Fetzer Company
www.waynepumps.com
WSB1275
12 Volt-75 Amp Hour
Avoid placing the battery near a heat-generating part
(such as a transformer). Using the battery near a heat source may cause the
battery to overheat, ignite, or burst.
In applications which use more than one battery,
first make sure of correct mutual connections between batteries, and then
connect the battery with the charger or the load. Make sure to firmly connect
the (+) pole of the batteries to the (+) terminal of the charger or load, and
the (-) pole to the (-) terminal in the same way. If the poles/terminals of the
batteries, the charger and the load are connected improperly, explosion,
ignition or damage to the batteries and/or equipment may occur, causing
injurt to personnel in some cases.
Be extemely careful not to drop the battery onto feet
to avoid the possibility of serious injury.
The operating temperature range for the battery
is specified below. Use the battery at temperatures beyond this range may
cause battery damage.
Normal operating temerature of the battery is 77°F (25°C).
When charged: -40°F to 140°F (-40°C to 60°C)
Do not allow the battery to be immersed in or wetted
with water/sea-water; as it may corrode the battery, ignite or create an
electric shock hazard.
Do not place or store the battery in an automobile
in hot weather, under direct sunlight, in front of a stove, or near fire. Use or
storage of the battery in these places may cause fire or bursting.
Use of the battery in a dusty environment is not
recommended, as it may cause the battery to short. The battery should be
periodically checked when used in such an environment.