Waygate Technologies Krautkramer USM Go, Operating Manual

Page: 75 / 296

Saving the settings 4 Principles of operation
USM Go Rev. 10 (06/2021) 4-23
– Switch over to the second operating level.
– Select the function group EVAL .
– Select the function LARGE .
– Press the function keys to choose the parameter
DSET as value.
– Switch over to the first operating level.
After recalling the instrument settings, the correspond-
ing filename (dataset name) is displayed in red letters in
the measurement line on top of the A-scan in the box on
the far right.
ATTENTION
The filename can be up to 14 characters long
for saving data sets (on the second operating
level). However, only the first 7 characters
are shown in the display on top of the A-scan
(on the first operating level).
Please note this limitation when saving data
sets in order to avoid any confusions be-
tween filenames starting with the same char-
acter.