manualshive.com logo in svg

Waygate Technologies Krautkramer USM Go, Operating Manual

Share
Download
Waygate Technologies Krautkramer USM Go Operating Manual Download Page 217

Test reports

6  Documentation

USM Go

Rev. 10 (06/2021)

6-7

Deleting test reports

You can delete files and directories easily by inserting 
the SD memory card into the SD card reader of your PC 
or by connecting the USM Go to a PC via a USB cable 
(see Section 

USB interface

, page 8-3).

You can also delete single dataset files on the second 
operating level of the USM Go.

Note

Only files of the type UGO are deleted. Files 
of the types BMP and JPG are retained.

– Switch to the second operating level.

– In the function group 

FILES

, select the function 

 

DIRECTORY

 and briefly press the joystick (USM Go) 

or the center key of the keypad (USM Go+). The di-
rectory of the SD memory card appears.

– Press the function keys to select a directory on the 

SD card.

– Press the joystick (USM Go) or the center key of the 

keypad (USM Go+) briefly to choose the selected di-
rectory.

– Switch to the function 

ACTION

 and press the function 

keys to select the function 

DELETE DATASET

.

Summary of Contents for Krautkramer USM Go









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands