Waygate Technologies Krautkramer USM Go, Operating Manual

Page: 212 / 296

6 Documentation Test reports
6-2 Rev. 10 (06/2021) USM Go
6.1 Test reports
Storing test reports
You can use the USM Go to store test reports and A-
scans. Test reports are stored as an image in the format
JPG and BMP, as well as an ASCII file in the format
UGO.
Note
All data are saved to the SD memory card.
Make sure that the SD card used in the in-
strument has a sufficient amount of free stor-
age capacity for your tasks.
You can store A-scans as well as current settings and
readings at any time using the function
COPY if you
have assigned this function to one of the function keys
(see Chapter 5.3
Assignment of function keys ,
page 5-8).
As an alternative, you can store test reports using the
corresponding function on the second operating level.
Storing using COPY
Note
If you repeatedly select the same filename
for storing, a consecutive numbering is auto-
matically attached to the filename, for exam-
ple FILE_002.
– Check in the function group FILES on the second op-
erating level whether the required memory location
and filename are selected.
– Switch back to the first operating level and press the
function key that has the function COPY assigned to it.
During the process of storing, the corresponding icon is
displayed next to the A-scan (see Section
Status dis-
play icons , page 0-7 at the beginning of this operating
manual).