Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 265 / 330

Software updates 7 Maintenance and care
Krautkrämer USM 100 Rev. 9 (09/2023) 265
Update in case of malfunction
In the event of a system crash or if the instrument can
no longer be started in the normal way, you can reset or
reinitialize the operating system with a software update.
To do this, you need a valid update file (extension .
mup )
on a USB stick.
Note
The USB stick may only contain one single
update file. Otherwise the installation pro-
cess will be stopped.
– Copy the update file into the root directory of the USB
stick.
– Make sure that the instrument is switched off.
– Insert the USB stick into the USB socket on the top of
the instrument (see page 54).
– Simultaneously press the outer Gain key (2) on the
back and the Power key (1) on the top, and hold the
two keys pressed until the display is turned on.
The installation process will then start. After successful
installation the instrument is shut down automatically.
Then, you can power on the instrument again and use
the new software version.
2 1