Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 235 / 330

Scanning and evaluation 5 Operation
Krautkrämer USM 100 Rev. 9 (09/2023) 235
Evaluation
For evaluation, you must first load the saved scan data.
Then you have the possibility to display details and indi-
vidual values of the measurements.
You can use the crosshair cursor (2) to mark a specific
location in the B-scan or the C-scan. When moving the
cursor in the C-scan, the B-scan is updated synchro-
nously. When moving the cursor in the B-scan, the cor-
responding A-scan is loaded.
The statistics box (3) in the B-scan displays selected
measurement values, when it is switched on (see
Stat
Box on page 231). The other values are displayed in
the Measurement line (1) as usual (see page 85).
The selection of values displayed in the statistics box
can be set in the software
Mentor Create only, which is
described in a separate manual.
Note
The data volume may have impact on the
analysis performance. If the scan size ex-
ceeds 100 mm x 100 mm with a resolution of
1 mm, we recommend using the software
USM 100 PC from Waygate Technologies
for inspection and analysis.
2 1
3