Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 201 / 330

JISDAC 5 Operation
Krautkrämer USM 100 Rev. 9 (09/2023) 201
Sensitivity correction
You can use the function Transfer Correction to com-
pensate for transfer losses in the material to be tested.
A correction is necessary if the test object and the refer-
ence standard have different surface qualities.
You have to determine the adjustment value for the
compensation of transfer losses by way of experiment.
In this connection, the gain is varied accordingly but the
curve shape remains the same.
Turning the JISDAC evaluation off
You can turn the DAC evaluation off at any time.
– Set the function JISDAC Mode to Off in order to hide
the curve and the evaluation lines.
Note
The DAC curve is not lost by turning the func-
tion off. By turning it on again, you can use
the function
JISDAC Mode to go back to the
DAC evaluation again without losing any set-
tings.
Deleting the DAC curve
You can delete the DAC curve at any time. After this, the
DAC evaluation is not possible until you have recorded
a new DAC curve.
– In the Command bar tap on Clear (see page 75) to
delete the DAC curve. A message box is displayed.
– Confirm the deletion of the DAC curve. The deletion
is acknowledged in the Information line (see
page 86).