Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 142 / 330

5 Operation UT Setup
142 Rev. 9 (09/2023) Krautkrämer USM 100
When the automatic gain control is switched on, further
functions are displayed with which you can configure
the AGC (see below).
AGC Max Amp / AGC Min Amp
To configure the automatic gain control, enter the mini-
mum and the maximum height of amplitude in percent
screen height that the echo signal should reach within
the gate.
Note
The smaller the ratio between the values
AGC Max Amp and AGC Min Amp , the
more sensitive the control process.
AGC Noise
You can define a threshold for the noise. Signals below
this threshold are not taken into account for the auto-
matic gain control.
LED Alarm
You can use the multi-color LED next to the screen (see
page 102) as an alarm signal. If the alarm event occurs,
the LED lights up accordingly.
The gate for triggering the alarm is selected in the func-
tion
Alarm Select .
Tone Alarm
You can output alarms as an acoustic signal directly
with the device. If an alarm event occurs, the signal
sounds.
The gate for triggering the alarm is selected in the func-
tion
Alarm Select .