Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 120 / 330

5 Operation Measurement line configuration
120 Rev. 9 (09/2023) Krautkrämer USM 100
5.6 Measurement line configuration
You can select which measurement values are dis-
played in the different boxes of the measurement line.
You can make the selection separately for each box.
– Tap on a box (1) in the measurement line. A dialog
box opens.
– In the left column, select a category, for example
DAC/TCG .
– In the middle column, select a measurement value.
The right column displays information about the se-
lected value.
– Tap on OK to save the selection. The selected mea-
surement value is displayed in the box.
1