Waygate Technologies Krautkramer USM 10, Operating Manual

Page: 20 / 242

1 Introduction Safety information
20 Rev. - (09/2021) Krautkrämer USM 100
1.1 Safety information
The Krautkrämer USM 100 has been designed and
tested according to IEC 61010-1, Safety requirements
for electrical equipment for measurement, control and
laboratory use, and was technically in perfectly safe and
faultless condition when leaving the manufacturing
works.
In order to maintain this condition and to ensure a safe
operation, you should always read the following safety
information carefully before putting the instrument into
operation.
The USM 100 is designed to meet the ingress protec-
tion level IP67 per IEC 60529-1. It can be operated ei-
ther with the corresponding lithium-ion batteries or with
the power adapter. The power adapter meets the re-
quirements of electrical safety class II.
ATTENTION
This product is not designed nor rated for use
in hazardous locations.
ATTENTION
Risk of injury due to electric energy!
The pulse voltage on the probe ports of the
USM 100 is exceeding 50 V but limited in
charge.
Only operate the USM 100 in the defined operating
ranges (see
Specifications from page 219).
Only connect testing equipment conforming to the de-
fined operating conditions (see
Connecting a probe on
page 51).
ATTENTION
The USM 100 is an instrument for materi-
als testing. Any use for medical or any
other applications is not permitted!
The instrument may only be used in industri-
al environments.