Waygate Technologies Krautkramer USM 10, Operating Manual

Page: 106 / 242

5 Operation UT function groups
106 Rev. - (09/2021) Krautkrämer USM 100
5.6 UT function groups
In the following chapters, the functions are described
according to their order in the respective function group,
or in the context of certain tasks, for example calibration.
Some functions are included in several function groups
for reasons of more efficient operation. It does not mat-
ter in which function group you operate these functions.
The available function groups and functions depend on
the panels (see page 72) set up in the loaded applica-
tion (see page 61).
Note
A quick way to find information about a par-
ticular function is to use the
Index at the end
of this manual (see page 225).
The UT Function directory gives you an al-
phabetical overview of all UT functions with
assignment to the various function groups
(see page 206).
Icon Name Page
no icon
Gain
107
A-Scan
109
Material Probe 116
Pulser Receiver 119
UT Setup 123
Gates 126
Auto Calibration 135
Probe Angle 136
Evaluation 138