Waygate Technologies Krautkramer USM 10, Operating Manual

Page: 105 / 242

Measurement line configuration 5 Operation
Krautkrämer USM 100 Rev. - (09/2021) 105
5.5 Measurement line configuration
You can select which measurement values are dis-
played in the different boxes of the measurement line.
You can make the selection separately for each box.
– Tap on a box (1) in the measurement line. A dialog
box opens.
– In the left column, select a category, for example
DAC/TCG .
– In the middle column, select a measurement value.
The right column displays information about the se-
lected value.
– Tap on OK to save the selection. The selected mea-
surement value is displayed in the box.
1