I PARTS AND SCREWS YOU RECEIVED|
＠x1
＠x1
皂
吓
Ax1
Bx4
Cx4
Z^
呼
©
This chair made by environmental friendly PP plastic and natural beech wood chair legs, with durable
quality and fashion appearing. The max. loading is 120kg, daily use we recommend do not over 100
kg, so that can prolong the lifespan of the chair.
-
Open the box and take out the seat surface, seat frame and accessory package. Lay it on with
a packing bag, and place the seat bottom on top of the packing bag. Take out the
accessories from the accessory kit, put (B) through the round hole on (C), and put it in place
for later use. Now take out the shelf (2) and align the holes at the bottom of the seat surface
(1), and then screw the screws into the screw holes one by one by hand. Note that the screws
should be tightened a few turns first. After all the screws have been screwed into the holes,
use (A) to tighten all the screws. The assembly is now complete. Please install other chairs
according to the above method.
USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE
尸
＿
A
B
C
Note:
The
seat
surface
is
made
of
fabric.
If
the
seat
surface
gets
dirty
during
assembly,
you
can
try
to
wipe
it
with
a
wet
towel
and
dry
it.
After
the
assembly
is
completed,
if
one
side
of
the
chair
leg
is
suspended
in
the
air,
you
can
disassemble
the
chair,
place
the
shelf
flat
on
the
ground,
with
the
suspended
leg
facing
up,
hold
the
iron
pipe
with
one
hand
and
press
it
down
a
few
times
to
solve
the
problem
of
uneven
legs.
phenomenon.
If
you
have
other
questions
during
use,
please
feel
free
to
consult
our
customer
service
staff.Have
a nice day.
