Waxman leakSMART hub3.0, Manual

Page: 14 / 22

leakSMART hub3.0
April 02, 2018 Copyright © 2018 Waxman
Page | 14

Power Amplifier Module
The power amplifier module is a high-performance, fully integrated RF front-end module (FEM)
designed for ZigBee applications.

Integrated PA with up to +21 dBm output power

Integrated LNA (2 dB noise figure typical) and bypass path

Integrated antenna diversity switching for all modes

Single-ended transmit/receive interface

Fast switch on/off time: < 800 ns

Supply range: 1.8 V to 3.6 V

Sleep mode current: < 1 μA typical

No external bias resistor is required

Antenna Diversity support
4.4 User Interface Switch
The leakSMART has three below user interaction switch:
Figure 9 – Hub3.0 switch details
1. Wi-Fi Provisioning Button: Use to put Wi-Fi in provision mode and press for 5 seconds to reset Wi-Fi
credentials.
2.
Factory Reset: To reset the Hub3.0 by 15 second long press. It is also used to reboot the system
without removing power supply. Pressing the switch will drive logic zero on RESET signal, which will
affects every modules on Hub3.0.
3.
Power ON/OFF Switch: To ON and OFF the power of leakSMART hub3.0.
4.5 User LED Indications
Single RGB LED is used to provide indication about different Hub3.0 functionality.